types

type BroadcastConfig struct {

	//交易过滤器长度
	TxFilterLen int `json:"txFilterLen,omitempty"`
	//区块过滤器长度
	BlockFilterLen int `json:"blockFilterLen,omitempty"`
	//关闭轻区块广播, 默认开启
	DisableLtBlock bool `json:"disableLtBlock,omitempty"`
	//区块轻广播的最低区块大小,单位KB, 大于该值时区块内交易采用短哈希广播, 默认100KB
	MinLtBlockSize int `json:"minLtBlockSize,omitempty"`
	//轻区块等待超时时长(毫秒), 默认1000 ms, 建议配置为出块时间的1/3
	LtBlockPendTimeout int64 `json:"ltBlockPendTimeout,omitempty"`
	//支持关闭批量交易广播
	DisableBatchTx bool `json:"disableBatchTx,omitempty"`
	//最大批量广播交易数量, 默认200
	MaxBatchTxNum int `json:"maxBatchTxNum,omitempty"`
	//批量广播交易最大间隔(毫秒), 默认100 ms
	MaxBatchTxInterval int `json:"maxBatchTxInterval,omitempty"`
	//关闭广播数据验证, 适用于联盟链私有链
	DisableValidation bool `json:"disableValidation,omitempty"`
}

type P2PSubConfig struct {
	// P2P服务监听端口号
	Port int32 `protobuf:"varint,1,opt,name=port" json:"port,omitempty"`
	// 手动配置节点
	Seeds []string `protobuf:"bytes,2,rep,name=seeds" json:"seeds,omitempty"`

	// p2p网络频道,用于区分主网/测试网/其他网络
	Channel int32 `protobuf:"varint,5,opt,name=channel" json:"channel,omitempty"`

	//最大dht连接数
	MaxConnectNum int32 `protobuf:"varint,7,opt,name=maxConnectNum" json:"maxConnectNum,omitempty"`
	//引导节点配置
	BootStraps []string `protobuf:"bytes,8,rep,name=bootStraps" json:"bootStraps,omitempty"`

	//中继传输主动建立连接，中继服务端可以选配，启动中继服务之后，NAT后面的节点可以通过中继节点广播自己的节点地址信息
	RelayHop            bool   `protobuf:"varint,10,opt,name=relayHop" json:"relayHop,omitempty"`
	DisableFindLANPeers bool   `protobuf:"varint,11,opt,name=disableFindLANPeers" json:"disableFindLANPeers,omitempty"`
	DHTDataPath         string `protobuf:"bytes,12,opt,name=DHTDataPath" json:"DHTDataPath,omitempty"`
	DHTDataCache        int32  `protobuf:"varint,13,opt,name=DHTDataCache" json:"DHTDataCache,omitempty"`
	// 分片数据保存比例
	Percentage int `protobuf:"varint,14,opt,name=percentage" json:"percentage,omitempty"`
	//是否开启全节点模式
	IsFullNode bool `protobuf:"varint,15,opt,name=isFullNode" json:"isFullNode,omitempty"`
	//是否启用中继功能，如果自己身NAT后面的节点，RelayEnable=true，则仍有可能被其他节点连接。
	RelayEnable        bool `protobuf:"varint,18,opt,name=relayEnable" json:"relayEnable,omitempty"`
	RelayServiceEnable bool `protobuf:"varint,18,opt,name=relayServiceEnable" json:"relayServiceEnable,omitempty"`
	//指定中继节点作为
	RelayNodeAddr []string `protobuf:"varint,19,opt,name=relayNodeAddr" json:"relayNodeAddr,omitempty"`
	// 不启动分片功能，默认启动
	DisableShard bool `protobuf:"varint,120,opt,name=disableShard" json:"disableShard,omitempty"`
	//特定场景下的p2p白名单，只连接配置的节点,联盟链使用
	WhitePeerList []string `protobuf:"bytes,21,rep,name=whitePeerList" json:"whitePeerList,omitempty"`
	// 扩展路由表最小节点数
	MinExtendRoutingTableSize int `protobuf:"varint,22,opt,name=minExtendRoutingTableSize" json:"minExtendRoutingTableSize,omitempty"`
	// 扩展路由表最大节点数
	MaxExtendRoutingTableSize int `protobuf:"varint,23,opt,name=n=maxExtendRoutingTableSize" json:"maxExtendRoutingTableSize,omitempty"`

	//配置libp2p库代码日志等级， 支持DEBUG, INFO, WARN, ERROR，默认ERROR
	Libp2pLogLevel string `json:"libp2pLogLevel,omitempty"`
	//配置libp2p库日志文件名 如logs/libp2p.log, 禁止和chain33使用一个日志文件, 详见issue #1117
	Libp2pLogFile string `json:"libp2pLogFile,omitempty"`
	// pubsub配置
	PubSub PubSubConfig `json:"pubsub,omitempty"`
	//启动私有网络，只有相同配置的节点才能连接，多用于联盟链需求，创建方式 hex.Encode([32]byte),32字节的十六进制编码字符串
	Psk string `json:"psk"`
	//广播子配置
	Broadcast BroadcastConfig `json:"broadcast,omitempty"`
	VerLimit  string          `json:"verLimit,omitempty"`
}

type PubSubConfig struct {

	// pub sub消息是否需要签名和验签
	DisablePubSubMsgSign bool `json:"disablePubSubMsgSign,omitempty"`

	// set the buffer size for outbound messages to a peer, Defaults to 128
	// We start dropping messages to a peer if the outbound queue if full
	PeerOutboundQueueSize int `json:"peerOutboundQueueSize,omitempty"`

	// sets the buffer of validate queue. Defaults to 128.
	// When queue is full, validation is throttled and new messages are dropped.
	ValidateQueueSize int `json:"validateQueueSize,omitempty"`

	// This should generally be enabled in bootstrappers and
	// well connected/trusted nodes used for bootstrapping.
	EnablePeerExchange bool `json:"enablePeerExchange,omitempty"`

	// GossipSubDlo sets the lower bound on the number of peers we keep in a GossipSub topic mesh.
	// If we have fewer than GossipSubDlo peers, we will attempt to graft some more into the mesh at
	// the next heartbeat.
	GossipSubDlo int `json:"gossipSubDlo,omitempty"`

	// GossipSubD sets the optimal degree for a GossipSub topic mesh. For example, if GossipSubD == 6,
	// each peer will want to have about six peers in their mesh for each topic they're subscribed to.
	// GossipSubD should be set somewhere between GossipSubDlo and GossipSubDhi.
	GossipSubD int `json:"gossipSubD,omitempty"`

	// GossipSubDhi sets the upper bound on the number of peers we keep in a GossipSub topic mesh.
	// If we have more than GossipSubDhi peers, we will select some to prune from the mesh at the next heartbeat.
	GossipSubDhi int `json:"gossipSubDhi,omitempty"`

	// GossipSubHeartbeatInterval controls the time between heartbeats. ms
	GossipSubHeartbeatInterval int `json:"gossipSubHeartbeatInterval,omitempty"`

	// GossipSubHistoryGossip controls how many cached message ids we will advertise in
	// IHAVE gossip messages. When asked for our seen message IDs, we will return
	// only those from the most recent GossipSubHistoryGossip heartbeats. The slack between
	// GossipSubHistoryGossip and GossipSubHistoryLength allows us to avoid advertising messages
	// that will be expired by the time they're requested.
	//
	// GossipSubHistoryGossip must be less than or equal to GossipSubHistoryLength to
	// avoid a runtime panic.
	GossipSubHistoryGossip int `json:"gossipSubHistoryGossip,omitempty"`

	// GossipSubHistoryLength controls the size of the message cache used for gossip.
	// The message cache will remember messages for GossipSubHistoryLength heartbeats.
	GossipSubHistoryLength int `json:"gossipSubHistoryLength,omitempty"`

	// MaxMsgSize, max message size in pub sub(MB)
	MaxMsgSize int `json:"maxMsgSize,omitempty"`
	// SubBufferSize customize the size of the subscribe output buffer
	SubBufferSize int `json:"subBufferSize,omitempty"`
}